RACEFIRMWARE BY ALEX_V LABS
ALEX_V LABS / RACE PROJECT

The Ultra Bee, unleashed.

Firmware for the stock controller: field-oriented motor control, modes sized to your battery, traction control on both wheels — and an app on your phone instead of a laptop.

No payment, no commitment — we'll write when sales open.

An Ultra Bee motorcycle in a dark studio with orange and cyan light
ECO · DAILY · SPORTModes sized to your battery
ASR 1–3Two-wheel traction control
BLEUpdates from the app
Features

Everything stock stays. Control is added.

The same controller, the same dash and bar buttons — what changes is the program that drives the motor, plus an app where all of it is visible and adjustable.

Power sized to the battery

ECO, DAILY and SPORT are yours to set: current, power, speed. The ceiling is the battery's rating: Ultra24 — 18 kW, Ultra25 — 28 kW, your own pack by its current.

Field-oriented control

FOC with field weakening and maximum torque per amp: the motor pulls across the whole rev range, and each mode's top speed is yours to set.

Grip on loose ground

ASR compares the front and rear wheel and trims current when the rear spins. Three levels, switched from a bar button.

Your throttle

Three curve types, rise and fall rates, a dead band. Three sets, switched from the dash menu.

The app

A dashboard for your bars — portrait and landscape, telemetry, rides with GPS and a map, GPX and CSV export. iPhone and Android.

Bluetooth updates

New versions install from the app — no teardown, no cables. Only while the bike stands with READY off; otherwise the controller won't start.

Signed for your controller

Every build is signed and bound to your controller's chip: tampered or foreign firmware won't install on it.

Stock works as before

The dash, bar buttons, function menu, crawl and reverse. Current, voltage and temperature protections, and a fault log.

All the features in detail

The app

The controller, on your phone.

Every change goes through a before → after review and is written only while the bike stands. The screens below are the app's demo mode — it works without a bike, too.

The Bike screen: speedometer, battery power, voltage, current and temperatures
Dashboard
The Modes screen: ECO, DAILY and SPORT with current, power and speed limits
Modes
The Battery screen: a 22s pack, voltage, charge and cells from the BMS
Battery and cells
The Data screen: the last minute's power chart, current values and peaks
Telemetry
The landscape dashboard: power and speed on two dials, battery, temperatures, consumption
The landscape dashboard on your bars: power and speed up front, the mode lit in its colour — ECO, DAILY, SPORT.
Compatibility

What you need.

MotorcycleUltra Bee

With the stock controller. Put the model year in the form — we'll confirm it fits.

BatteryUltra24 · Ultra25 · your own

For your own pack — its cell count and currents; the app works out the rest.

PhoneiPhone · Android

iOS 17 or later, Android 8 or later. The Bluetooth module for the link comes in the kit and is fitted with the firmware.

  1. The waitlistLeave your email and a few words about your bike — it's free.
  2. A note before launchPrice, where and when to install — before you decide anything.
  3. Install and tuneWe or an authorised partner in your region fit the firmware and the module. Then it's the app: modes, throttle, ASR, Bluetooth updates.
Pre-order

Join the waitlist.

Sales are for Europe and the USA. We'll write before launch: price, install procedure, dates. There's no payment now, and the entry commits you to nothing.

NO PAYMENT
Phone

You're on the waitlist.

We'll write to your email before sales open. If you change your mind, reply to that note or write to [email protected] and we'll delete your data.

FAQ

The short version.

Does the waitlist cost anything?

No. It's not an order or a payment — just a way to hear about the launch first. We'll send the price and the install procedure before you decide anything.

Where is it sold, and who installs it?

In Europe and the USA. We or an authorised partner in your region install the firmware and the Bluetooth module; where and when, we'll write before launch. Later updates come from the app, over Bluetooth.

Where can I ride?

Off-road and on closed tracks only. Changing the controller's settings — power, current, speed — can make the motorcycle non-compliant for public roads.

Warranty and liability?

Replacing the firmware may void the motorcycle maker's warranty. The firmware and the app are provided “as is”, without any warranty; by using them you accept the risk that comes with it and are responsible for your settings and your riding. ALEX_V LABS is not liable for the consequences — to the extent the law allows. The details are in the terms.

What are the risks?

Wrong settings can cause a jolt, loss of traction or a drive fault, and editing the parameters directly without understanding their effect can destroy the equipment, cause a short circuit and a fire, lead to injury and disability and put life in danger — yours and others'. That's why new settings are checked standing still, with the wheel lifted, in full gear. The full list of risks is in the terms.

What protects you?

Settings are written only while the bike stands with READY off; every change goes through a before → after review; current, voltage and temperature protections; calibrations that drive current stop if the phone's link drops. Direct parameter edits only in expert mode, after explicitly accepting the risk. Safety on the trail is still yours: gear up, and try new settings standing, with the rear wheel off the ground.

What data do you keep?

Only what's in the form, to tell you when sales open. No cookies, ads or trackers. Deleted on your first request. The details are in the privacy policy.

Are you affiliated with Sur-Ron?

No. Race Firmware is an independent ALEX_V LABS project. Sur-Ron and Ultra Bee are trademarks of their owners; we name them only to state compatibility.